Heating & air conditioning symbols
Clear filtersPOWERFULHeating & air conditioningPOWERFULGives maximum cooling or heating capacity for 20 minutes, then returns to the previous settings. In COOL and HEAT the airflow is fixed at maximum and temperature and airflow cannot be changed; in AUTO the airflow is also fixed at maximum; in DRY the set temperature drops by 2.5 °C and airflow rises slightly; in FAN the airflow is fixed at maximum. It only works while the unit is running and cannot be combined with ECONO, COMFORT AIRFLOW or OUTDOOR UNIT QUIET.On ARC466A9
Power level (MIN / MED / MAX)Heating & air conditioningPower level (MIN / MED / MAX)Power button and display bars. Press to choose minimum (one bar), medium (two bars) or maximum (three bars) heat output. In ECO mode the chosen level is the highest the radiator will use.On TRRS
PumpHeating & air conditioningPumpButton and indicator for pump draining on models with a built-in pump. Fit the pump drain hose and remove the normal drain hose first; the pump then empties the bucket when it fills. Do not use the pump when the outdoor temperature is 0 °C or lower.On MAD50C1AWS
Right and left swingHeating & air conditioningRight and left swingShown when the louvers (vertical blades) swing left and right. Combined with the up and down swing the flaps and louvers move in turn (3-D airflow), which mixes cool air near the floor and warm air near the ceiling. Press the button again to stop the louvers in the current position.On ARC466A9
Standby (plug)Heating & air conditioningStandby (plug)Shown when the radiator is plugged in but not heating (standby). It always comes back in standby after a power cut or after being unplugged. Press the on/standby button to start heating.On TRRS
Summer modeHeating & air conditioningSummer modeHeating is switched off while hot water production stays available. Appears after the heating flow temperature is set to Heating off.On VU 446/5-5
Timer on/offHeating & air conditioningTimer on/offSets an automatic start or stop up to 24 hours ahead (0.5-hour steps up to 10 hours, then 1-hour steps). With the unit running, the first press sets Timer OFF and a second press Timer ON; with the unit off the order is reversed. Switching the unit on or off, or setting 0.0, cancels the timer.On MAD50C1AWS
TurboHeating & air conditioningTurboSwitches between turbo and normal fan speed; the high fan indicator shows when turbo is on. Use turbo for the fastest moisture removal and switch it off once the room is at the humidity you want.On MAD50C1AWS
Up and down swingHeating & air conditioningUp and down swingShown when the flaps (horizontal blades) swing up and down to spread the airflow. Press the swing button again when the flaps are where you want them to stop them there. Always move the flaps with the remote, never by hand.On ARC466A9
26–34 OF 34
PreviousNext