The register
Standard cotton programme (energy label)LaundryStandard cotton programme (energy label)Marks the cotton programme at 40 °C or 60 °C that is the standard programme under EU regulations 1015/2010 and 1061/2010. It is the most efficient choice in energy and water for normally soiled cotton. The real water temperature may differ slightly from the one declared, and the spin speed can be lowered with SPIN SELECTION. Maximum load 5 to 7 kg depending on the model.On Candy
Standby (plug)Heating & air conditioningStandby (plug)Shown when the radiator is plugged in but not heating (standby). It always comes back in standby after a power cut or after being unplugged. Press the on/standby button to start heating.On TRRS
Start-stop active (green)Dashboard lightsStart-stop active (green)Shows the state of the start-stop system on cars that have it. If the engine does not stop automatically, read the accompanying status: temperature, electrical demand and other conditions can prevent it. A crossed-out version can mean the conditions are not met; a fault message needs separate attention.On Audi
Start-stop engine off2 meaningsStart-stop engine offThe START-STOP system has automatically switched off the engine.Differs by brand.On Škoda
Start/Reload3 meaningsStart/ReloadPauses the running programme so you can open the door, add forgotten items and carry on with the wash. Not possible on washes above 50 °C.Differs by brand.On Bosch
Steam oven safeFood contact marksSteam oven safeThe product can be used in a steam oven, up to a maximum of 100 °C.On Mepal
Steering Assist indicator (green)Dashboard lightsSteering Assist indicator (green)A green steering wheel means the Steering Assist is working: it helps keep the car in its lane and at a safe distance from other vehicles.On BMW
Steering Assistant warning (red)Dashboard lightsSteering Assistant warning (red)A red steering wheel means the system is not keeping the car in its lane or at a proper distance from other vehicles. Take full control of steering and distance yourself.On BMW
Steering defect (amber wheel with !)2 meaningsSteering defect (amber wheel with !)The control lamp lights up or flashes yellow: the steering is stiffer or reacts more sensitively than usual. If it stays lit, restart the engine and drive slowly for a short distance; contact a specialist workshop if it remains on. It may also appear after the 12-volt battery was disconnected and reconnected; drive slowly for a short distance. If it flashes, turn the steering wheel slightly from one side to the other and switch the ignition off and on; if it keeps flashing after the ignition is switched on, do not continue driving and seek specialist assistance.Differs by brand.On CUPRA
Steering fault (amber heavy wheel with !)2 meaningsSteering fault (amber heavy wheel with !)Yellow. Lit continuously: steering fault; have it checked by a workshop if it stays on. Flashing: problem with the steering lock; do not continue your journey if it still flashes after switching the ignition on again.Differs by brand.On Volkswagen
Steering fault (amber)3 meaningsSteering fault (amber)Lit: power steering assistance has partly failed and may be reduced. Switch off, restart the engine and drive a few metres; if it stays on, seek a garage. Flashing with a message to move the wheel: the steering column lock has not released; move the wheel slightly back and forth, and if it stays locked, stop and seek a garage. Flashing with a lock-fault message (KESSY): continue carefully and seek a garage.Differs by brand.On Škoda
Steering fault (red)4 meaningsSteering fault (red)A serious fault affects steering assistance, steering control or another steering function. Pull over safely if a stop message appears or steering turns heavy or erratic. If the wheel is restricted or the steering lock stays engaged, mention it when calling for recovery, and do not try a generic reset.Differs by brand.On Audi
Steering lock / steering fault warning3 meaningsSteering lock / steering fault warningOrange or red: a fault or hazard warning that should be taken seriously; the steering column needs servicing; this can indicate serious mechanical trouble. Have it checked promptly.Differs by brand.On BMW
Steering system warning light (yellow)Dashboard lightsSteering system warning light (yellow)The steering system may be faulty. Drive carefully and adapt your driving to the conditions. Have the fault repaired as soon as possible at a Porsche dealer.On Porsche
SterileMedical device label symbolsSterileThe medical device has gone through a sterilisation process. Versions with an extra box after the word name the method used, such as EO, R or a thermometer for steam or dry heat.On ISO 15223-1
Sterilized using ethylene oxide (STERILE EO)Medical device label symbolsSterilized using ethylene oxide (STERILE EO)The device was sterilised using ethylene oxide (EO) gas. Like the other STERILE marks it means the contents are sterile as supplied.On ISO 15223-1
Sterilized using irradiation (STERILE R)Medical device label symbolsSterilized using irradiation (STERILE R)The device was sterilised using irradiation, shown by the R in the second box. Like the other STERILE marks it means the contents are sterile as supplied.On ISO 15223-1
Sterilized using steam or dry heatMedical device label symbolsSterilized using steam or dry heatThe device was sterilised using steam or dry heat, shown by the thermometer in the second box. Like the other STERILE marks it means the contents are sterile as supplied.On ISO 15223-1
StopDevice controlsStopEnds playback of the CD, USB file or recording.On Device controls
Stop & Start (green A)2 meaningsStop & Start (green A)On mild-hybrid models, lights green and steady when the engine has been put into STOP mode because the car has stopped. If it flashes briefly, STOP mode is momentarily unavailable or START mode has been triggered automatically.Differs by brand.On Peugeot
Stop & Start off (amber A, OFF)2 meaningsStop & Start off (amber A, OFF)On mild-hybrid models, orange. Steady with a message: Stop & Start has been switched off by hand. Steady: it was switched off automatically because the outside temperature is below 0 °C or above +35 °C. Flashing then steady with a message: the system has a fault; have it checked by a dealer or qualified workshop.Differs by brand.On Peugeot
Stop/Start active indicator (green)Dashboard lightsStop/Start active indicator (green)The Stop/Start function is in Autostop mode.On Jeep
StretcherEmergency exit and first-aid signsStretcherA stretcher is kept here for carrying an injured person. Fetch it when someone cannot be moved safely in another way.On ISO 7010
Summer modeHeating & air conditioningSummer modeHeating is switched off while hot water production stays available. Appears after the heating flow temperature is set to Heating off.On VU 446/5-5
Super Easy IronLaundrySuper Easy IronAlternating drum movements reduce creases, and the dryness level is set to Ready to Iron (it can be changed). It also tumbles the load against creasing before a delayed start and every 10 minutes for up to 6 hours after the cycle ends; turn the selector to OFF to stop this.On Candy