Jeep automotive symbols
Jeep: dashboard warning and indicator lights, vehicle controls and car-related marks.
Jeep red warning lights19
Red usually means a serious fault or a safety warning. Stop when it is safe and check the light's meaning before driving on.
Air bag warning light (seated occupant, red)Dashboard lightsAir bag warning light (seated occupant, red)The light comes on for four to eight seconds as a bulb check when the ignition is first placed in ON. If it lights with a single chime, a fault with the air bag system has been detected; it stays on until the fault is cleared. If it does not come on at start, stays on, or comes on while driving, have the system inspected by an authorised dealer as soon as possible.On Jeep
Brake warning (BRAKE)5 meaningsBrake warning (BRAKE)Monitors brake functions: the parking brake is applied, the brake fluid level is low, or the ABS/ESC system has detected a brake hydraulic or booster fault. Together with the ABS light it indicates an electronic brake force distribution failure that needs immediate repair. It may flash momentarily in sharp cornering. Driving with the light on is dangerous: part of the brake system may have failed; have it checked immediately.Differs by brand.On Jeep
Charging / battery warning21 meaningsCharging / battery warningThe battery is not charging properly. If it stays on while the engine is running, there may be a malfunction with the charging system. Contact an authorised dealer as soon as possible.Differs by brand.On Jeep
Coolant temperature warning (red)14 meaningsCoolant temperature warning (red)The engine coolant temperature is too high, with a chime. Pull over safely, turn off the A/C, shift into NEUTRAL and idle the vehicle. If the temperature does not return to normal, turn the engine off immediately and call for service.Differs by brand.On Jeep
Door open warning light (top view, four doors, red)Dashboard lightsDoor open warning light (top view, four doors, red)Comes on when a door is ajar or open and not fully closed. If the vehicle is moving there will also be a single chime.On Jeep
Electric power steering fault light (red)Dashboard lightsElectric power steering fault light (red)Indicates a fault with the Electric Power Steering (EPS) system. Continued operation with reduced power steering assist could pose a safety risk; obtain service as soon as possible.On Jeep
Electronic throttle control warning light (red)Dashboard lightsElectronic throttle control warning light (red)Indicates a problem with the Electronic Throttle Control (ETC) system. If it stays on, the vehicle is usually drivable; cycle the ignition when stopped in PARK and see a dealer soon. If it flashes with the engine running, immediate service is required: performance may be reduced, the idle rough or the engine may stall, and towing may be needed. It may also come on if the accelerator and brake are pressed together.On Jeep
Engine oil level / oil pressure warning15 meaningsEngine oil level / oil pressure warningLow engine oil pressure, with a chime. Stop the vehicle safely and turn the engine off as soon as possible; if the light is still on after restarting, turn the engine off and contact a dealer. Do not operate the vehicle until the cause is corrected. The light does not show the quantity of oil in the engine.Differs by brand.On Jeep
Hood open warning light (SUV side view, red)Dashboard lightsHood open warning light (SUV side view, red)Comes on when the hood is ajar or open and not fully closed. If the vehicle is moving there will also be a single chime.On Jeep
Hybrid system service warning light (red)Dashboard lightsHybrid system service warning light (red)The hybrid electric vehicle system requires service, shown with the message Service Hybrid Electric Vehicle System. If the light stays on or keeps coming back, contact an authorised dealer as soon as possible.On Jeep
Oil temperature warning light (red)Dashboard lightsOil temperature warning light (red)The engine oil temperature is high. Stop the vehicle and shut off the engine as soon as possible, and wait for the oil temperature to return to normal levels.On Jeep
Plug status fault warning light (red)Dashboard lightsPlug status fault warning light (red)A plug status or charging fault has been detected while the vehicle is not moving, shown with a message: re-plug or try another charging station, or check the external charging station. Contact a dealer if it continues. The vehicle cannot be driven until the charging cord is disconnected.On Jeep
Seat belt reminder11 meaningsSeat belt reminderThe driver or front passenger seat belt is unbuckled, with a chime. The light flashes or stays on while driving if a front seat belt remains unbuckled.Differs by brand.On Jeep
Speed override warning light (red mph)Dashboard lightsSpeed override warning light (red mph)Shown in Turtle Mode levels 3 and 4 when the driver exceeds the imposed limited speed; vehicle speed and functions are limited.On Jeep
Swing gate open warning light (red)Dashboard lightsSwing gate open warning light (red)Comes on when the swing gate (rear door) is open. If the vehicle is moving there will also be a single chime.On Jeep
Torque limited warning light (red turtle)Dashboard lightsTorque limited warning light (red turtle)Acceleration is limited because of reduced performance of the engine or electric motor. Contact an authorised dealer if the light persists.On Jeep
Traction battery fault4 meaningsTraction battery faultIndicates a failure in the power battery system. Contact an authorised dealer if the light persists.Differs by brand.On Jeep
Transmission temperature warning light (red)Dashboard lightsTransmission temperature warning light (red)The transmission fluid temperature is high, for example when towing. Stop the vehicle and idle in PARK or NEUTRAL until the light goes off, then drive normally. Continuing to drive can make the fluid boil, cause a fire and severely damage the transmission or clutch.On Jeep
Vehicle security light (red dot)Dashboard lightsVehicle security light (red dot)Flashes rapidly for about 15 seconds while the vehicle security system is arming, then flashes slowly until the system is disarmed.On Jeep
Jeep amber and yellow warning lights24
Amber or yellow usually means a fault or a reminder: the car can normally be driven, but have it checked soon.
4H four-wheel drive indicator (amber)Dashboard lights4H four-wheel drive indicator (amber)The vehicle is in four-wheel drive and the front and rear driveshafts are mechanically locked together.On Jeep
ABS warning18 meaningsABS warningLights for up to four seconds at ignition. If it stays on while driving, the anti-lock function is not working and needs service soon; the normal brakes still work if the Brake light is not on. If it does not light at start, have it inspected.Differs by brand.On Jeep
Axle locker fault indicator (amber)Dashboard lightsAxle locker fault indicator (amber)Indicates that a front and/or rear axle locker fault has been detected.On Jeep
Cruise control fault warning light (amber)Dashboard lightsCruise control fault warning light (amber)The cruise control system is not functioning properly and service is required. Contact an authorised dealer.On Jeep
Drowsy driver system fault light (amber)Dashboard lightsDrowsy driver system fault light (amber)The Drowsy Driver Detected system is not operating correctly and requires service. See an authorised dealer.On Jeep
ESC / TCS (amber solid car with skid marks)6 meaningsESC / TCS (amber solid car with skid marks)Flashes or comes on when the Electronic Stability Control is active; buzzing or clicking sounds are normal. If it stays on continuously with the engine running, an ESC fault has been detected; if it remains after several ignition cycles and driving above 30 mph (48 km/h), see a dealer.Differs by brand.On Jeep
ESC / TCS off (amber solid car, OFF)5 meaningsESC / TCS off (amber solid car, OFF)Indicates that Electronic Stability Control is off. ESC turns back on each time the ignition is placed in ON.Differs by brand.On Jeep
Engine outline (amber)7 meaningsEngine outline (amber)Part of the On-Board Diagnostic system that monitors engine and transmission controls. If it stays on, have the vehicle serviced; often a loose fuel cap or poor fuel is the cause, and the vehicle is usually drivable. If it flashes, power loss or serious catalytic converter damage is imminent: immediate service is required. A hot catalytic converter can cause a fire over flammable material.Differs by brand.On Jeep
Forward collision warning OFF light (amber)Dashboard lightsForward collision warning OFF light (amber)This indicator light shows that Forward Collision Warning is off.On Jeep
Front and rear axle lock indicator (amber)Dashboard lightsFront and rear axle lock indicator (amber)Indicates when the front, rear or both axles have been locked; the lock icon on each axle shows the current lock status.On Jeep
Fuel level sensor failure light (amber)Dashboard lightsFuel level sensor failure light (amber)There is a fuel level sensor failure. Take the vehicle to an authorised dealer and have it inspected.On Jeep
Loose fuel filler cap light (amber)Dashboard lightsLoose fuel filler cap light (amber)The fuel filler cap is loose. Close it properly; if the light stays on, see a dealer.On Jeep
Low fuel warning6 meaningsLow fuel warningWhen about 2.0 gallons (7.5 L) of fuel remain, the light comes on with a chime and stays on until fuel is added.Differs by brand.On Jeep
Low tyre pressure (TPMS)18 meaningsLow tyre pressure (TPMS)On: tyre pressure is low or slowly dropping; stop, check the tyres soon and inflate them. Do not drive on flat tyres. If it flashes for about a minute and then stays on, the tyre pressure monitoring system has a malfunction.Differs by brand.On Jeep
Low washer fluid warning5 meaningsLow washer fluid warningThis warning light comes on when the windshield washer fluid is low.Differs by brand.On Jeep
Off Road+ indicator (amber)Dashboard lightsOff Road+ indicator (amber)This indicator light comes on when Off Road+ has been activated.On Jeep
Rear axle lock indicator (amber)Dashboard lightsRear axle lock indicator (amber)This light indicates when the rear axle lock has been activated.On Jeep
SERV 4WD warning light (amber)Dashboard lightsSERV 4WD warning light (amber)The four-wheel drive system is not functioning properly. Drive to the nearest service centre immediately.On Jeep
Service Stop/Start system light (amber)Dashboard lightsService Stop/Start system light (amber)The Stop/Start system is not functioning properly and service is required. Contact an authorised dealer.On Jeep
Service adaptive cruise control light (amber)Dashboard lightsService adaptive cruise control light (amber)This light comes on when Adaptive Cruise Control (ACC) is not operating and needs service.On Jeep
Service forward collision warning light (amber)Dashboard lightsService forward collision warning light (amber)Indicates a fault in the Forward Collision Warning system. Contact an authorised dealer for service.On Jeep
Sway bar fault warning light (amber)Dashboard lightsSway bar fault warning light (amber)This light comes on when there is a fault in the sway bar disconnect system.On Jeep
Sway bar indicator (amber)Dashboard lightsSway bar indicator (amber)This indicator light comes on when the front sway bar is disconnected.On Jeep
Traffic sign recognition fault light (amber)Dashboard lightsTraffic sign recognition fault light (amber)Indicates a fault in the Traffic Sign Recognition system. Contact an authorised dealer if it stays on after restarting the engine.On Jeep
Jeep green indicator lights10
Green usually shows that a system is switched on and working, such as lights, cruise control or a driving mode.
ACC set with target (green)Dashboard lightsACC set with target (green)Adaptive Cruise Control is set and a vehicle ahead has been detected.On Jeep
ACC set, no target detected (green)Dashboard lightsACC set, no target detected (green)Adaptive Cruise Control is set and no vehicle ahead has been detected.On Jeep
Cruise control active (green gauge with arrow)2 meaningsCruise control active (green gauge with arrow)The cruise control is set to the desired speed.Differs by brand.On Jeep
Direction indicators (green outline arrows)3 meaningsDirection indicators (green outline arrows)The arrows flash with the turn signals. A chime sounds if a signal is left on for more than 1 mile (1.6 km). Rapid flashing means a bulb has failed and should be checked.Differs by brand.On Jeep
Front fog light indicator (green, bold)Dashboard lightsFront fog light indicator (green, bold)This indicator light comes on when the front fog lights are on.On Jeep
Max Regeneration indicator (green)Dashboard lightsMax Regeneration indicator (green)Max Regeneration is on and capable. If the feature is unavailable, the switch LED flashes for five seconds.On Jeep
Parking/headlights on indicator (green)Dashboard lightsParking/headlights on indicator (green)This indicator light comes on when the parking lights or headlights are turned on.On Jeep
Plug status indicator (green)Dashboard lightsPlug status indicator (green)When plugged in, the light shows that the charging plug is securely attached; it does not necessarily mean the vehicle is charging. A message shows the charge status. The vehicle cannot be driven until it is unplugged.On Jeep
READY indicator (green, bold)Dashboard lightsREADY indicator (green, bold)Indicates that the vehicle has enough power to be driven, regardless of the speed of the vehicle.On Jeep
Stop/Start active indicator (green)Dashboard lightsStop/Start active indicator (green)The Stop/Start function is in Autostop mode.On Jeep
Jeep blue indicator lights1
Blue is used for a few indicators, most often the high beam (main beam) headlights.
Jeep white indicator lights8
White usually shows a system's status: ready, on standby or temporarily unavailable.
2H indicator (white)Dashboard lights2H indicator (white)Alerts the driver that the vehicle is in the Two-Wheel Drive High mode.On Jeep
ACC ready indicator (white)Dashboard lightsACC ready indicator (white)Adaptive Cruise Control is turned on but not set.On Jeep
Cruise control ready (white)3 meaningsCruise control ready (white)The cruise control is set to the desired speed.Differs by brand.On Jeep
Cruise control ready indicator (white)Dashboard lightsCruise control ready indicator (white)This light comes on when the cruise control has been turned on but not set.On Jeep
Drowsiness detected warning light (white)Dashboard lightsDrowsiness detected warning light (white)Driver drowsiness has been detected: take a break. A pop-up message stays on until the driver presses OK.On Jeep
Hill descent control indicator (white)Dashboard lightsHill descent control indicator (white)Solid: Hill Descent Control is armed; it is only available in 4WD Low and below 30 mph (48 km/h). It flashes if the conditions are not met.On Jeep
Max Regeneration indicator (white)Dashboard lightsMax Regeneration indicator (white)This indicator light shows that Max Regeneration is on but not ready.On Jeep
Selec-Speed Control indicator (white)Dashboard lightsSelec-Speed Control indicator (white)This light comes on when Selec-Speed Control is activated; the vehicle must be in 4WD Low.On Jeep
Jeep grey indicator lights1
Grey usually shows a system that is switched on but not active right now.
